Descripción
Here’s the translation:
The two-way switch is designed to be integrated into the double-track roadway network and achieve the necessary route in each installation, with a radius of 350 mm, allowing both right and left turns simultaneously while continuing straight. The three-way switch is designed to be integrated into the double-track roadway network and achieve the necessary route in each installation, with a radius of 350 mm, allowing both right and left turns.
Aerial track profile entirely made of stainless steel.
Rolling profile formed by 50x40x2 mm tube with support saddles cut by laser every 600 mm, formed by 6 mm thick AISI-304 stainless steel sheet, allowing the use of this type of track for very heavy racks due to its high load capacity.
Moment of inertia of the birrail track variable according to the dimensions of the tube for the necessary load capacity for the installation.
Track section designed to allow the transport carts to roll on it while facilitating the assembly of the necessary elements for its attachment.
Attachment of the track to maintenance beam by using saddles with stainless steel screws, plates, and clamps or by using hangers from concrete floor with a separation distance depending on the load.
Fastening elements of the saddles to the maintenance beam made of stainless steel AISI-304.
Stainless steel AISI-304 fasteners.
Track design compatible with standard equipment.
Track compatible with automatic rack movement systems in the installation such as “tractorinos”.
Welded joints with acid pickling finish.
Descargar
